Diferencia entre revisiones de «Especificaciones fabricación»

De Proyecto Butiá
Saltar a: navegación, buscar
(→‎Other important specifications about sensors PCB)
Línea 108: Línea 108:
 
|-
 
|-
 
|Resistor 68kΩ||2|| 5% tolerance, 1/4w power|| R68kΩ
 
|Resistor 68kΩ||2|| 5% tolerance, 1/4w power|| R68kΩ
 +
|-
 +
|[http://www.digikey.com/product-search/en?x=0&y=0&lang=en&site=us&KeyWords=365-1174-ND Led]||2||HIGH INTENSITY LED 525NM ROUND GREEN 3MM like digikey part 365-1174-ND||LED
 +
|-
 +
|[http://www.aliexpress.com/item/LXD4548-CdS-Photoconductive-cells-CdS-Photoresistor/473940099.html Photoresistor]||3|| 10K-200K OHM 4.20MM Ceramic Substrate(Length x Width x Height):L4.3mm X W3.4mm X H1.8mm like LXD4548||LDR
 +
|-
 +
|[http://www.digikey.com/product-search/en/sensors-transducers/optical-sensors-distance-measuring/1967026?k=GP2Y0A21YK0F GP2Y0A21YK0F]||1|| SENSOR DISTANCE MEASURE 80CM ANLG||sharp
 +
|-
 +
|[http://www.digikey.com/product-search/en?x=0&y=0&lang=en&site=us&KeyWords=KS-03Q-02 Pushbutton]||1|| like digkey KS-03Q-02 product||SW_PUSH
 +
|-
 +
|[http://www.digikey.com/product-detail/en/ACC-C17-3/EG4805-ND/2116284 Pushbutton cap]||1|| like digikey ACC-C17-6 product ||
 +
|-
 +
|}
 +
 +
PCB material specification:
 +
* FR4 Material
 +
* 1.6MM Thickness
 +
* HASL Lead Free Surface Finish
 +
* 1oz Copper Thickness
 +
* Green Solder Mask
 +
* White Silkscreen
 +
* [http://www.fing.edu.uy/inco/proyectos/butia/files/PCBenero2014/allsenlasercutV2.zip Sensor kit Gerber file]
 +
* Each module specified in plantilla_allsenV2_lasercut-F_SilkS must be cuted with mouse bite technique or similar
 +
* The sharp sensor must be connected in this way [[Archivo:Sharp.jpg]]
 +
* To make more robust the connections please pass the cable througth the holes before doing the soldiering. TODO attach a new picture
 +
 +
=====Other important specifications about sensors PCB=====
 +
*mouse bite to separate sensors
 +
*low height capacitors
 +
*High intensity LED
 +
 +
==Placa Genéricos==
 +
 +
{| border="0" style="background:#ffffff" align="top" class="sortable wikitable"
 +
|+ align="center" style="background:DarkSlateBlue; color:white"|<big>'''Bill of Materials allselasercut'''</big>
 +
! width="60 px" style="background:Lavender; color:Black"|Component
 +
! width="20 px" style="background:Lavender; color:Black"|Quantity
 +
! width="100 px" style="background:Lavender; color:Black"|Description
 +
! width="60 px" style="background:Lavender; color:Black"|PCB Identifier
 +
 +
|-
 +
|[http://www.digikey.com/product-detail/en/5555167-1/A31444-ND/769588 RJ45 Female Jack]||6|| CONN MOD JACK R/A 8P8C ||RJ45
 +
|-
 +
|[http://www.dx.com/p/diy-3-5mm-audio-jack-20-piece-pack-122555#.VQjY19bALFY Audio Jack]||2|| Female 3,5mm audio jack || JACK_5P
 +
|-
 +
|Resistor 1.5kΩ||2||5% tolerance, 1/4w power|| 1,5kΩ
 +
|-
 +
|Resistor 2.2kΩ||2||5% tolerance, 1/4w power || 2,2kΩ
 +
|-     
 +
|Resistor 3.9kΩ||2|| 5% tolerance, 1/4w power|| 3,9kΩ
 +
|-
 +
|Resistor 100kΩ||2|| 5% tolerance, 1/4w power|| 100kΩ
 +
|-
 +
|Resistor 150kΩ||2|| 5% tolerance, 1/4w power|| 150kΩ
 +
|-
 +
|Resistor 220kΩ||2|| 5% tolerance, 1/4w power|| 220kΩ
 +
|-
 +
|Resistor 6,8kΩ||1|| 5% tolerance, 1/4w power|| 6,8kΩ
 +
|-
 +
|Resistor 22kΩ||1|| 5% tolerance, 1/4w power|| 22kΩ
 +
|-
 +
|Resistor 15kΩ||2|| 5% tolerance, 1/4w power|| 15kΩ
 
|-
 
|-
 
|[http://www.digikey.com/product-search/en?x=0&y=0&lang=en&site=us&KeyWords=365-1174-ND Led]||2||HIGH INTENSITY LED 525NM ROUND GREEN 3MM like digikey part 365-1174-ND||LED  
 
|[http://www.digikey.com/product-search/en?x=0&y=0&lang=en&site=us&KeyWords=365-1174-ND Led]||2||HIGH INTENSITY LED 525NM ROUND GREEN 3MM like digikey part 365-1174-ND||LED  

Revisión del 01:06 18 mar 2015

Placa USB4Butiá

Bill of Materials USB4Butiá
Component Quantity Description PCB Identifier
PIC 18F4550 1 microcontroller PIC18F4550
Socket 40pin 1 socket for the microcontroller under PIC18F4550
RJ45 Female Jack 6 CONN MOD JACK R/A 8P8C RJ45
USB Female Type B 1 CONN USB RECEPT R/A TYPE B 4POS USB_B
ax12 bus connector 1 CONN HEADER 3POS 2.5MM R/A TIN AX-12
Resistor 120Ω 1 resistor 5% tolerance, 1/4w power 120Ω
Resistor 390Ω 2 resistor 5% tolerance, 1/4w power 390Ω
Resistor 1KΩ 2 resistor 5% tolerance, 1/4w power 1KΩ
Resistor 10KΩ 11 resistor 5% tolerance, 1/4w power 10KΩ
Resistor 1MΩ 1 resistor 5% tolerance, 1/4w power 1MΩ
22PF 2 capacitor 22pF
0.1UF 4 capacitor 0.1uF
0.47UF 1 capacitor 0.47uF
electrolitic capacitor 10UF, 25V, 20% 1 lower than 7mm 10uF
Led 3mm 1 standar 3mm led color green LED
20MHZ crystal 1 HC49S-20-B-30-30-F-20.000MHz must be with height less than 7mm Crystal 20MHZ
switch 2 4.3mm microswitch RST SW1, PROG SW2
Female Header 11 Contact spacing 2.54mm (0.1") h1..h11

PCB material specification:

  • FR4 Material
  • 1.6MM Thickness
  • HASL Lead Free Surface Finish
  • 1oz Copper Thickness
  • Green Solder Mask
  • White Silkscreen
  • USB4Butiá Gerber file

Shield para motores

Bill of materials for USB4Butiá motor shield
Component Quantity Description PCB Identifier
L298HN 1 IC BRIDGE DRIVER PAR 15MULTIWATT U1 L298
1A7 8 diode type 1N4001 o 1N4007 D1..D8
male headers pins 14 Contact spacing 2.54mm (0.1") P1..P4
100nF (10V minimum, 20% tolerance) 2 ceramic capacitor C1, C2

PCB material specification:

Placa Sensores

Bill of Materials allselasercut
Component Quantity Description PCB Identifier
RJ45 Female Jack 5 CONN MOD JACK R/A 8P8C RJ45
470uf electronic capacitor 1 CAP ALUM 470UF 25V 20% RADIAL C1 CAPAPOL
Resistor 10kΩ 4 5% tolerance, 1/4w power R10kΩ
Resistor 6.8kΩ 1 5% tolerance, 1/4w power R6.8kΩ
Resistor 120Ω 2 5% tolerance, 1/4w power R120Ω
Resistor 1kΩ 2 5% tolerance, 1/4w power R1kΩ
Resistor 68kΩ 2 5% tolerance, 1/4w power R68kΩ
Led 2 HIGH INTENSITY LED 525NM ROUND GREEN 3MM like digikey part 365-1174-ND LED
Photoresistor 3 10K-200K OHM 4.20MM Ceramic Substrate(Length x Width x Height):L4.3mm X W3.4mm X H1.8mm like LXD4548 LDR
GP2Y0A21YK0F 1 SENSOR DISTANCE MEASURE 80CM ANLG sharp
Pushbutton 1 like digkey KS-03Q-02 product SW_PUSH
Pushbutton cap 1 like digikey ACC-C17-6 product

PCB material specification:

  • FR4 Material
  • 1.6MM Thickness
  • HASL Lead Free Surface Finish
  • 1oz Copper Thickness
  • Green Solder Mask
  • White Silkscreen
  • Sensor kit Gerber file
  • Each module specified in plantilla_allsenV2_lasercut-F_SilkS must be cuted with mouse bite technique or similar
  • The sharp sensor must be connected in this way Sharp.jpg
  • To make more robust the connections please pass the cable througth the holes before doing the soldiering. TODO attach a new picture
Other important specifications about sensors PCB
*mouse bite to separate sensors
*low height capacitors
*High intensity LED

Placa Genéricos

Bill of Materials allselasercut
Component Quantity Description PCB Identifier
RJ45 Female Jack 6 CONN MOD JACK R/A 8P8C RJ45
Audio Jack 2 Female 3,5mm audio jack JACK_5P
Resistor 1.5kΩ 2 5% tolerance, 1/4w power 1,5kΩ
Resistor 2.2kΩ 2 5% tolerance, 1/4w power 2,2kΩ
Resistor 3.9kΩ 2 5% tolerance, 1/4w power 3,9kΩ
Resistor 100kΩ 2 5% tolerance, 1/4w power 100kΩ
Resistor 150kΩ 2 5% tolerance, 1/4w power 150kΩ
Resistor 220kΩ 2 5% tolerance, 1/4w power 220kΩ
Resistor 6,8kΩ 1 5% tolerance, 1/4w power 6,8kΩ
Resistor 22kΩ 1 5% tolerance, 1/4w power 22kΩ
Resistor 15kΩ 2 5% tolerance, 1/4w power 15kΩ
Led 2 HIGH INTENSITY LED 525NM ROUND GREEN 3MM like digikey part 365-1174-ND LED
Photoresistor 3 10K-200K OHM 4.20MM Ceramic Substrate(Length x Width x Height):L4.3mm X W3.4mm X H1.8mm like LXD4548 LDR
GP2Y0A21YK0F 1 SENSOR DISTANCE MEASURE 80CM ANLG sharp
Pushbutton 1 like digkey KS-03Q-02 product SW_PUSH
Pushbutton cap 1 like digikey ACC-C17-6 product

PCB material specification:

  • FR4 Material
  • 1.6MM Thickness
  • HASL Lead Free Surface Finish
  • 1oz Copper Thickness
  • Green Solder Mask
  • White Silkscreen
  • Sensor kit Gerber file
  • Each module specified in plantilla_allsenV2_lasercut-F_SilkS must be cuted with mouse bite technique or similar
  • The sharp sensor must be connected in this way Sharp.jpg
  • To make more robust the connections please pass the cable througth the holes before doing the soldiering. TODO attach a new picture
Other important specifications about sensors PCB
*mouse bite to separate sensors
*low height capacitors
*High intensity LED
Obtenido de «http://www.fing.edu.uy/inco/proyectos/butia/mediawiki/index.php?title=Especificaciones_fabricación&oldid=6296»