Diferencia entre revisiones de «Especificaciones fabricación»
De Proyecto Butiá
(→Placa Sensores) |
(→Placa Genéricos) |
||
(No se muestran 25 ediciones intermedias de 3 usuarios) | |||
Línea 15: | Línea 15: | ||
|[http://www.digikey.com/product-detail/en/5555167-1/A31444-ND/769588 RJ45 Female Jack]||6|| CONN MOD JACK R/A 8P8C ||RJ45 | |[http://www.digikey.com/product-detail/en/5555167-1/A31444-ND/769588 RJ45 Female Jack]||6|| CONN MOD JACK R/A 8P8C ||RJ45 | ||
|- | |- | ||
− | |[http://www.digikey.com/product-detail/en/292304-1/A31725-ND/773785 USB Female Type B]||1||CONN USB RECEPT R/A TYPE B 4POS||USB_B | + | |[http://www.digikey.com/product-detail/en/292304-1/A31725-ND/773785 USB Female Type B]||1||CONN USB RECEPT R/A TYPE B 4POS||USB_B |
|- | |- | ||
|[http://www.digikey.com/product-search/en?WT.z_header=search_go&lang=en&keywords=WM18901-ND&x=0&y=0&cur=USD ax12 bus connector] ||1|| CONN HEADER 3POS 2.5MM R/A TIN||AX-12 | |[http://www.digikey.com/product-search/en?WT.z_header=search_go&lang=en&keywords=WM18901-ND&x=0&y=0&cur=USD ax12 bus connector] ||1|| CONN HEADER 3POS 2.5MM R/A TIN||AX-12 | ||
|- | |- | ||
− | | | + | |Resistor 120Ω||1||resistor 5% tolerance, 1/4w power||120Ω |
|- | |- | ||
− | | | + | |Resistor 390Ω||2|| resistor 5% tolerance, 1/4w power||390Ω |
|- | |- | ||
− | | | + | |Resistor 1KΩ||2|| resistor 5% tolerance, 1/4w power||1KΩ |
|- | |- | ||
− | | | + | |Resistor 10KΩ||11|| resistor 5% tolerance, 1/4w power||10KΩ |
|- | |- | ||
− | | | + | |Resistor 1MΩ||1|| resistor 5% tolerance, 1/4w power||1MΩ |
|- | |- | ||
|22PF||2||capacitor||22pF | |22PF||2||capacitor||22pF | ||
Línea 37: | Línea 37: | ||
|[http://www.newark.com/rubycon/25nw710mefc6-3x7/capacitor-alum-elect-10uf-25v-20/dp/54T5342?in_merch=Popular%20Capacitors electrolitic capacitor 10UF, 25V, 20%]||1|| lower than 7mm||10uF | |[http://www.newark.com/rubycon/25nw710mefc6-3x7/capacitor-alum-elect-10uf-25v-20/dp/54T5342?in_merch=Popular%20Capacitors electrolitic capacitor 10UF, 25V, 20%]||1|| lower than 7mm||10uF | ||
|- | |- | ||
− | |Led 3mm||1|| ||LED | + | |Led 3mm||1||standar 3mm led color green ||LED |
|- | |- | ||
− | |20MHZ crystal||1|| height | + | |20MHZ crystal||1||HC49S-20-B-30-30-F-20.000MHz must be with height less than 7mm||Crystal 20MHZ |
|- | |- | ||
|switch||2|| 4.3mm microswitch|| RST SW1, PROG SW2 | |switch||2|| 4.3mm microswitch|| RST SW1, PROG SW2 | ||
|- | |- | ||
|Female Header||11||Contact spacing 2.54mm (0.1")||h1..h11 | |Female Header||11||Contact spacing 2.54mm (0.1")||h1..h11 | ||
+ | |- | ||
|} | |} | ||
Línea 53: | Línea 54: | ||
* Green Solder Mask | * Green Solder Mask | ||
* White Silkscreen | * White Silkscreen | ||
− | * [http://www.fing.edu.uy/inco/proyectos/butia/files/ | + | * [http://www.fing.edu.uy/inco/proyectos/butia/files/PCB2015/usb4butia1.9.0_lr.zip USB4Butiá Gerber file] |
== Shield para motores == | == Shield para motores == | ||
Línea 70: | Línea 71: | ||
|- | |- | ||
|male headers pins ||14||Contact spacing 2.54mm (0.1")||P1..P4 | |male headers pins ||14||Contact spacing 2.54mm (0.1")||P1..P4 | ||
− | |- | + | |- |
− | + | ||
|100nF (10V minimum, 20% tolerance)||2||ceramic capacitor||C1, C2 | |100nF (10V minimum, 20% tolerance)||2||ceramic capacitor||C1, C2 | ||
|- | |- | ||
Línea 99: | Línea 99: | ||
|[http://www.digikey.com/product-detail/en/ECA-1EM471B/P10379TB-ND/268464 470uf electronic capacitor]||1|| CAP ALUM 470UF 25V 20% RADIAL || C1 CAPAPOL | |[http://www.digikey.com/product-detail/en/ECA-1EM471B/P10379TB-ND/268464 470uf electronic capacitor]||1|| CAP ALUM 470UF 25V 20% RADIAL || C1 CAPAPOL | ||
|- | |- | ||
− | |Resistor 10kΩ||4||5% tolerance, 1/4w power|| | + | |Resistor 10kΩ||4||5% tolerance, 1/4w power|| R10kΩ |
|- | |- | ||
− | |Resistor 6.8kΩ||1||5% tolerance, 1/4w power || | + | |Resistor 6.8kΩ||1||5% tolerance, 1/4w power || R6.8kΩ |
|- | |- | ||
− | |Resistor 120Ω||2|| 5% tolerance, 1/4w power|| | + | |Resistor 120Ω||2|| 5% tolerance, 1/4w power|| R120Ω |
|- | |- | ||
− | |Resistor 1kΩ||2|| 5% tolerance, 1/4w power|| | + | |Resistor 1kΩ||2|| 5% tolerance, 1/4w power|| R1kΩ |
|- | |- | ||
− | |Resistor 68kΩ||2|| 5% tolerance, 1/4w power|| | + | |Resistor 68kΩ||2|| 5% tolerance, 1/4w power|| R68kΩ |
|- | |- | ||
|[http://www.digikey.com/product-search/en?x=0&y=0&lang=en&site=us&KeyWords=365-1174-ND Led]||2||HIGH INTENSITY LED 525NM ROUND GREEN 3MM like digikey part 365-1174-ND||LED | |[http://www.digikey.com/product-search/en?x=0&y=0&lang=en&site=us&KeyWords=365-1174-ND Led]||2||HIGH INTENSITY LED 525NM ROUND GREEN 3MM like digikey part 365-1174-ND||LED | ||
Línea 128: | Línea 128: | ||
* Green Solder Mask | * Green Solder Mask | ||
* White Silkscreen | * White Silkscreen | ||
+ | * [http://www.fing.edu.uy/inco/proyectos/butia/files/PCBenero2014/allsenlasercutV2.zip Sensor kit Gerber file] | ||
* Each module specified in plantilla_allsenV2_lasercut-F_SilkS must be cuted with mouse bite technique or similar | * Each module specified in plantilla_allsenV2_lasercut-F_SilkS must be cuted with mouse bite technique or similar | ||
− | * The sharp sensor must be connected in this way [[Archivo: | + | * The sharp sensor must be connected in this way [[Archivo:Sharp.jpg]] |
+ | * To make more robust the connections please pass the cable througth the holes before doing the soldiering. TODO attach a new picture | ||
+ | |||
+ | =====Other important specifications about sensors PCB===== | ||
+ | *mouse bite to separate sensors | ||
+ | *low height capacitors | ||
+ | *High intensity LED | ||
+ | |||
+ | ==Placa Genéricos== | ||
+ | |||
+ | {| border="0" style="background:#ffffff" align="top" class="sortable wikitable" | ||
+ | |+ align="center" style="background:DarkSlateBlue; color:white"|<big>'''Bill of Materials genérico'''</big> | ||
+ | ! width="60 px" style="background:Lavender; color:Black"|Component | ||
+ | ! width="20 px" style="background:Lavender; color:Black"|Quantity | ||
+ | ! width="100 px" style="background:Lavender; color:Black"|Description | ||
+ | ! width="60 px" style="background:Lavender; color:Black"|PCB Identifier | ||
+ | |||
+ | |- | ||
+ | |[http://www.digikey.com/product-detail/en/5555167-1/A31444-ND/769588 RJ45 Female Jack]||6|| CONN MOD JACK R/A 8P8C ||RJ45 | ||
+ | |- | ||
+ | |[http://www.dx.com/p/diy-3-5mm-audio-jack-20-piece-pack-122555#.VQjY19bALFY Audio Jack]||2|| Female 3,5mm audio jack || JACK_5P | ||
+ | |- | ||
+ | |Resistor 1.5kΩ||2||5% tolerance, 1/4w power|| 1,5kΩ | ||
+ | |- | ||
+ | |Resistor 2.2kΩ||2||5% tolerance, 1/4w power || 2,2kΩ | ||
+ | |- | ||
+ | |Resistor 3.9kΩ||2|| 5% tolerance, 1/4w power|| 3,9kΩ | ||
+ | |- | ||
+ | |Resistor 100kΩ||2|| 5% tolerance, 1/4w power|| 100kΩ | ||
+ | |- | ||
+ | |Resistor 150kΩ||2|| 5% tolerance, 1/4w power|| 150kΩ | ||
+ | |- | ||
+ | |Resistor 220kΩ||2|| 5% tolerance, 1/4w power|| 220kΩ | ||
+ | |- | ||
+ | |Resistor 6,8kΩ||1|| 5% tolerance, 1/4w power|| 6,8kΩ | ||
+ | |- | ||
+ | |Resistor 22kΩ||1|| 5% tolerance, 1/4w power|| 22kΩ | ||
+ | |- | ||
+ | |Resistor 15kΩ||1|| 5% tolerance, 1/4w power|| 15kΩ | ||
+ | |- | ||
+ | |Diode||4|| diode type 1N4148 || 1N4148 | ||
+ | |- | ||
+ | |[http://www.dx.com/p/3-pin-screw-terminal-block-connectors-20-piece-pack-122491#.VQkButbALFY Bornera]||4||3 PIN Bornier connector||Conn_Sensor | ||
+ | |- | ||
+ | |[http://www.dx.com/p/2-54mm-mini-jumper-connector-black-50-piece-pack-123648#.VQkCftbALFY Jumper]||12|| Jumper | ||
+ | |} | ||
+ | |||
+ | * [https://www.fing.edu.uy/inco/proyectos/butia/mediawiki/images/c/cf/Plantilla_generico.zip Plantilla Genérico] | ||
+ | |||
+ | =====Other important specifications about sensors PCB===== | ||
+ | *mouse bite to separate sensors |
Revisión actual del 15:26 9 may 2017
Contenido
Placa USB4Butiá
Component | Quantity | Description | PCB Identifier |
---|---|---|---|
PIC 18F4550 | 1 | microcontroller | PIC18F4550 |
Socket 40pin | 1 | socket for the microcontroller | under PIC18F4550 |
RJ45 Female Jack | 6 | CONN MOD JACK R/A 8P8C | RJ45 |
USB Female Type B | 1 | CONN USB RECEPT R/A TYPE B 4POS | USB_B |
ax12 bus connector | 1 | CONN HEADER 3POS 2.5MM R/A TIN | AX-12 |
Resistor 120Ω | 1 | resistor 5% tolerance, 1/4w power | 120Ω |
Resistor 390Ω | 2 | resistor 5% tolerance, 1/4w power | 390Ω |
Resistor 1KΩ | 2 | resistor 5% tolerance, 1/4w power | 1KΩ |
Resistor 10KΩ | 11 | resistor 5% tolerance, 1/4w power | 10KΩ |
Resistor 1MΩ | 1 | resistor 5% tolerance, 1/4w power | 1MΩ |
22PF | 2 | capacitor | 22pF |
0.1UF | 4 | capacitor | 0.1uF |
0.47UF | 1 | capacitor | 0.47uF |
electrolitic capacitor 10UF, 25V, 20% | 1 | lower than 7mm | 10uF |
Led 3mm | 1 | standar 3mm led color green | LED |
20MHZ crystal | 1 | HC49S-20-B-30-30-F-20.000MHz must be with height less than 7mm | Crystal 20MHZ |
switch | 2 | 4.3mm microswitch | RST SW1, PROG SW2 |
Female Header | 11 | Contact spacing 2.54mm (0.1") | h1..h11 |
PCB material specification:
- FR4 Material
- 1.6MM Thickness
- HASL Lead Free Surface Finish
- 1oz Copper Thickness
- Green Solder Mask
- White Silkscreen
- USB4Butiá Gerber file
Shield para motores
Component | Quantity | Description | PCB Identifier |
---|---|---|---|
L298HN | 1 | IC BRIDGE DRIVER PAR 15MULTIWATT | U1 L298 |
1A7 | 8 | diode type 1N4001 o 1N4007 | D1..D8 |
male headers pins | 14 | Contact spacing 2.54mm (0.1") | P1..P4 |
100nF (10V minimum, 20% tolerance) | 2 | ceramic capacitor | C1, C2 |
PCB material specification:
- FR4 Material
- 1.6MM Thickness
- HASL Lead Free Surface Finish
- 1oz Copper Thickness
- Green Solder Mask
- White Silkscreen
- USB4Butiá motor shield Gerber file
Placa Sensores
Component | Quantity | Description | PCB Identifier |
---|---|---|---|
RJ45 Female Jack | 5 | CONN MOD JACK R/A 8P8C | RJ45 |
470uf electronic capacitor | 1 | CAP ALUM 470UF 25V 20% RADIAL | C1 CAPAPOL |
Resistor 10kΩ | 4 | 5% tolerance, 1/4w power | R10kΩ |
Resistor 6.8kΩ | 1 | 5% tolerance, 1/4w power | R6.8kΩ |
Resistor 120Ω | 2 | 5% tolerance, 1/4w power | R120Ω |
Resistor 1kΩ | 2 | 5% tolerance, 1/4w power | R1kΩ |
Resistor 68kΩ | 2 | 5% tolerance, 1/4w power | R68kΩ |
Led | 2 | HIGH INTENSITY LED 525NM ROUND GREEN 3MM like digikey part 365-1174-ND | LED |
Photoresistor | 3 | 10K-200K OHM 4.20MM Ceramic Substrate(Length x Width x Height):L4.3mm X W3.4mm X H1.8mm like LXD4548 | LDR |
GP2Y0A21YK0F | 1 | SENSOR DISTANCE MEASURE 80CM ANLG | sharp |
Pushbutton | 1 | like digkey KS-03Q-02 product | SW_PUSH |
Pushbutton cap | 1 | like digikey ACC-C17-6 product |
PCB material specification:
- FR4 Material
- 1.6MM Thickness
- HASL Lead Free Surface Finish
- 1oz Copper Thickness
- Green Solder Mask
- White Silkscreen
- Sensor kit Gerber file
- Each module specified in plantilla_allsenV2_lasercut-F_SilkS must be cuted with mouse bite technique or similar
- The sharp sensor must be connected in this way
- To make more robust the connections please pass the cable througth the holes before doing the soldiering. TODO attach a new picture
Other important specifications about sensors PCB
*mouse bite to separate sensors *low height capacitors *High intensity LED
Placa Genéricos
Component | Quantity | Description | PCB Identifier |
---|---|---|---|
RJ45 Female Jack | 6 | CONN MOD JACK R/A 8P8C | RJ45 |
Audio Jack | 2 | Female 3,5mm audio jack | JACK_5P |
Resistor 1.5kΩ | 2 | 5% tolerance, 1/4w power | 1,5kΩ |
Resistor 2.2kΩ | 2 | 5% tolerance, 1/4w power | 2,2kΩ |
Resistor 3.9kΩ | 2 | 5% tolerance, 1/4w power | 3,9kΩ |
Resistor 100kΩ | 2 | 5% tolerance, 1/4w power | 100kΩ |
Resistor 150kΩ | 2 | 5% tolerance, 1/4w power | 150kΩ |
Resistor 220kΩ | 2 | 5% tolerance, 1/4w power | 220kΩ |
Resistor 6,8kΩ | 1 | 5% tolerance, 1/4w power | 6,8kΩ |
Resistor 22kΩ | 1 | 5% tolerance, 1/4w power | 22kΩ |
Resistor 15kΩ | 1 | 5% tolerance, 1/4w power | 15kΩ |
Diode | 4 | diode type 1N4148 | 1N4148 |
Bornera | 4 | 3 PIN Bornier connector | Conn_Sensor |
Jumper | 12 | Jumper |
Other important specifications about sensors PCB
*mouse bite to separate sensors